Simplified Marine Technologies, Inc.

Adaptor Plate and Zinc or Aluminum Split Ring Anodes for Volvo 120 Saildrive ™ , Volvo 270/280™ & Volvo 290™ Outdrives.

Split Ring Anode Adaptors for V120 Saildrives, V280/290 Outdrives & V280/290 Duoprops.

Split Ring Anodes are available in either Zinc or Aluminum.

Our V120 Adaptor for Volvo 120 Saildrives™ is shown on the left. On the right it is shown with its split ring anode which is

attached with four fasteners to the V120 Anode Adaptor. The V280/290 outdrive and duoprop kits are similar in their attachment.

V120 Adaptor Plate.

Mounts on the Volvo 120 Saildrive™

using the same holes as the original zinc.

The propeller must be removed to install this

V120 Adaptor Plate. Once the

V120 Adaptor Plate is installed there is

no further need to remove the propeller to

replace the anode.

V120 Adaptor Plate with V120 Split Ring Anode.

Split ring anodes attach to V120 Adaptor Plate using

four SS screws. Because the anodes are split they may

be attached with out removing the propeller or

needing to haul the boat from the water.

The pictures below show the V120 Adaptor Plate mounted on a Volvo 120 Saildrive™

V120 Adaptor Plate mounted on Volvo

120 Saildrive™ with the propeller removed.

Volvo 120 Saildrive™ with propeller intalled and

V120 Split Ring Anodes mounted with two mounting screws visible

Same Volvo 120 Saildrive™ with the split between

the two V120 Anodes shown on the top.

Same Volvo 120 Saildrive™ showing the

complete V120 Adapter package mounted

on the Volvo 120 Saildrive™.

The Adaptor plate and the Split Ring Anode Kit are designed to match the standard hole and screw patterns of the Volvo 120 Saildrive™, Volvo 280/290outdrives™, or Volvo 280/290 Duoprops™ . No modification of the saildrive or outdrive is necessary to attach the respective Adaptor plate. After removing your propeller, line up the Adaptor with the Saildrive's or Outdrive's anode attachment holes, insert and tighten the supplied screws. Once the adaptor plate is in place and the propeller reinstalled there is no further need to remove the propeller to replace the anodes protecting the Saildrive or Outdrive, as the Split Anodes are mounted onto the Adaptor Plate from the side using four SS mounting screws.

All of our SMT, Inc. Propeller Adaptors are made of high quality marine alloy and were developed over many years of in-water marine corrosion control.

To order:

Call (Janice @253-307-3360) or email SMT, Inc at smt@smtinc.net

and order both an Adaptor Plate Kit and one or more of the Split Ring Aluminum or Zinc Anode Kits.

Because the anodes can be attached without removing

the propeller a significant cost savings in dive time and propeller removal time will be realized.

We accept checks, money orders and all major Credit Cards for our products plus Sales Tax when applicable.

We use USPS Priority mail and charge a shipping and handling fee of $15.00.

Other shipping arrangements may be made by special order.

Adaptor Plate Kit

for